How to Install a Ghost Immobiliser

A ghost immobiliser is a hidden security device that protects your vehicle from key cloning and hacking. It works by preventing the engine from running until it is activated using a PIN code that can be up to 20 characters in length.

This additional layer of security is not detectable by thieves who may not be aware of it. Certain systems come with an app that allows the owner to disarm their immobiliser if they forget their PIN code or to use service/valet mode.

Connecting the vehicle’s CAN Bus to the vehicle’s

The Ghost 2 Immobiliser is a cutting-edge security system, is able to be integrated directly into the ECU of your vehicle. It provides a discreet protection against thieves. It is highly efficient and user-friendly and is a great option to add to your vehicle’s security arsenal. However, just like any other anti-theft device, it is not 100% reliable and requires regular maintenance to ensure its operation. Fortunately, this guide will help you get the most value from your Ghost 2 Immobiliser.

CAN (Controller Area Network) is a robust serial network that allows microcontrollers to communicate with one another in short distances, without the need for a central control unit. It is designed for multiplexing electrical wiring within vehicles to save on copper and offers a range of advantages, such as low cost and ease of use.

The CAN protocol is utilized in a majority of modern automobiles to connect with the engine management system, steering control module and air conditioning controls and many more. It also transmits sensor data like speed sensors, as well as other inputs, to control the various features of the car. The CAN bus can be used to monitor the health of these different components. It could stop the vehicle from starting if it’s in a dangerous condition.

It’s important to know how the CAN bus operates and how it is secured. Using CAN bus can be a great way to enhance the features of your vehicle, but it’s also essential to safeguard it from hackers and other threats. The best method to accomplish this is to install firewalls and monitoring your CAN bus through software.

Ghost2’s discrete control unit is hidden within the car’s dashboard or wiring harness, preventing an intruder from physically altering it. It is also impossible to reset a PIN or emergency code without having access to the vehicle.

You can activate Transport Mode when you have to give your vehicle away for service, valet parking or for any other reason. This feature disables both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only reactivate when the vehicle has reached 31 mph over a period of 15 minutes.

How to create a PIN code

The Ghost immobiliser shields your vehicle from thieves. The cutting-edge technology uses the PIN code to disable the engine and stop it from running without the correct code or an authorized fob/mobile device. The system’s subtle design makes it unnoticeable, and also provides unbeatable security against theft. The system is TASSA-certified and could save you substantial sums on your car insurance.

During the installation, Ghost enters a “learning mode” to record the sequences of buttons that are pressed to create your unique pin codes. Once the pin code has been created and the installer has completed its work, it will guide you through the process of activating the system. Once activated, the Ghost system will shut down the starter motor of your vehicle unless a valid PIN is entered or the vehicle is switched into transport mode. This makes it very difficult for thieves or cloners to hack into or replicate your starter system.

Installing an Ghost immobiliser is easy but it is crucial to follow the detailed instructions in the user’s manual to ensure that it operates properly. Hand tools are essential in making accurate connections and a multimeter will aid in checking the electrical value. Insulation tape, heat shrink tubing, and cable ties are a good option to protect exposed wiring. Also, be car stolen with ghost immobiliser TheKeyLab to test the system regularly to identify any problems and potential mistakes.

It is essential to test the system one more time prior to turning on the ignition. The Ghost immobiliser will re-arm itself after 3 to 30 seconds, depending on your car’s model. It also has the option of a Service/Valet mode, which allows you to temporarily remove the system for servicing your vehicle or parking valet.

Idealy, the immobiliser will be hidden beneath the dashboard or behind the steering wheel. Make use of a small piece of duct tape or paint on the wires CAN H and L to make them easier to find during testing. In addition, the CAN H and CAN L wires must be connected to a power source that provides continuous 12V. It is also crucial to re-check the connections after testing, as a mistake in identifying these wires could cause the system to malfunction.

The system must be activated

A ghost immobiliser prevents your car from starting unless you press a set of buttons inside the car generally the steering wheel, door panel or central console. The sequence is determined by the user and can be changed if necessary. Once activated, the system will not be removed. This makes it a great choice for anyone looking to protect their vehicle from theft.

The system is designed to be undetectable. This means it can’t be detected by modern diagnostics or code-grabbing technologies. It also does not send out radio frequencies which makes it difficult for thieves to find the device.

If the device is discovered it will stop the engine from running. It will also sound an alarm to scare the burglar away. The device can be used to monitor the location of the car and help police recover it when it is stolen.

If you’re looking for a ghost immobiliser get in touch with the experts at Car Specalist Customs to get a quote and discuss your options. We are fully trained to install a ghost immobiliser on your vehicle, and will make sure it is hidden in a difficult-to-access area. We can also install other security measures, like a kill switch and wheel lock, to keep your vehicle safe from theft.

Disarming the system

It is important to know how to deactivate the Ghost immobiliser if it is installed on your car. This is useful in case you forget your keys or your battery is dead. The system uses a unique PIN code that only you know, so the immobiliser will not be able to start your vehicle without entering this code. Pressing a combination buttons on the steering wheel or on the dashboard is the most efficient way to enter your code. This is a simpler method than using the key fob and it also keeps anyone from copying your remote.

Ghost2 is noninvasive unlike other immobilisers from the aftermarket which require cutting wires for installation. It also integrates with the CAN bus system of your vehicle to function. Its most notable characteristic is that it disables the engine, without affecting normal vehicle functions. This makes it very difficult for thieves to use signal boosts or to clone keys for cars. Additionally, it doesn’t emit radio frequencies, which means thieves can’t detect the system.

The Ghost system also features the Transport Mode that allows you to temporarily disable the security system in occasions like transportation or servicing. This feature is useful if you are lending your vehicle out to someone else, without sharing your PIN code or if your vehicle needs to be secured even while you drive it. To activate Transport Mode you need to press the service button 5 times within 2 seconds. The Ghost system will confirm activation with five indication signals.

After you’re done, make sure to save the emergency code in a secure place away from your vehicle. If you happen to encounter a situation where you are locked out of your vehicle, you’ll be able to contact the technician or company who installed the system and they will give you the code. If you are unable reach them, then you can seek out an authorized dealer. However, this may require verification procedures, and you could be charged for additional fees.

This system isn’t just practical, but it can also protect your vehicle from theft, and also reduce the cost of insurance. Many insurance companies offer lower monthly rates or even financial incentives for installing this anti-theft technology.