How to Install a Ghost Immobiliser
Ghost immobilisers are hidden security system that protects your car from key cloning and hacking. It works by stopping the engine of your vehicle from starting until it is activated using the PIN code that is up to 20 characters long.
This additional layer of security is not visible to thieves who might not be aware of it. Certain systems come with an app which allows the owner to deactivate their immobiliser if they forget their PIN number or use the service/valet mode.
Connecting to the vehicle’s CAN bus
The Ghost 2 Immobiliser is a cutting-edge security system that can be incorporated into your vehicle’s ECU offering a secure protection against thieves. It is highly efficient and user-friendly. This makes it a valuable asset to your vehicle’s arsenal of security. Like all anti-theft devices, it’s not foolproof and requires regular maintenance in order to function effectively. Luckily, this guide will aid you in getting the most value from the Ghost 2 Immobiliser.
CAN (Controller Area Network) is a robust serial networking, allows microcontrollers communicate with each over short distances. A central control unit is not required. It is designed to multiplex electrical wiring within vehicles to cut down on copper and has a number of advantages, such as low cost and ease of use.
In most modern cars In modern cars, the CAN protocol is used to communicate with a variety of systems, including the engine management system (EMS), transmission controller, steering module as well as air conditioning controls and more. It also carries sensor information like speed sensors, as well as other inputs, to regulate the vehicle’s various features. The CAN bus is used to monitor these diverse components, and can prevent the vehicle from starting if they’re in danger of failure.
It’s important to know how the CAN bus functions and how it is secured. Using CAN bus can be an excellent way to enhance the features of your vehicle, but it’s vital to safeguard it from hackers and other threats. Installing a firewall and monitoring your CAN-bus with software is the best way to achieve this.
Ghost2’s discrete control unit is hidden within the dashboard of the car or in the wiring harness, which prevents thieves from physically tampering with it. It’s also impossible to reset the PIN or emergency code without access to the vehicle.
If you need to surrender your vehicle for servicing, valet parking or for any other reason, you can use the Transport Mode. This feature turns off both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only be activated after the vehicle has travelled 31 mph for a time of 15 minutes.
The process of creating a PIN code
The Ghost immobiliser is a powerful security system that protects your vehicle from thieves. The revolutionary technology utilizes an PIN to shut down the vehicle’s engine and prevent it starting without the correct code or an authorized fob/mobile. The system’s subtle design makes it virtually invisible and also provides unbeatable protection against theft. Furthermore, immobiliser ghost is TASSA verified and can lead to significant savings on insurance premiums for cars.
During the installation, Ghost enters a “learning mode” to record the sequence of buttons that are pressed in order to create unique pin codes. The installer will guide you through activating the system once the pin code has been created. Once activated, the Ghost system will disable the vehicle’s start motor until you enter a valid pin or switch the vehicle to transport mode. This makes it difficult for thieves or cloners to hack into or replicate your starter system.
Installing an Ghost immobiliser is straightforward but it is crucial to follow the detailed instructions in the user’s manual to ensure that it operates properly. Basic hand tools will assist in making accurate connections, and a multimeter can aid in checking the electrical parameters. Insulation tape and heat shrink tubing can protect exposed wiring and cable tie is essential to keep everything neat and secure. Be sure to check the system frequently to spot any potential issues and mistakes.
It is important to check the system one final time prior to turning on the ignition. Ghost immobilisers will re-arm themselves after 3 to 30 seconds, dependent on the model of the vehicle. It also has a Service/Valet mode that allows you to temporarily disable the system while you are servicing your vehicle or parking valet.
The immobiliser should be concealed in a hidden location beneath the steering wheel or dashboard. Use a small amount of duct tape or paint on the CAN H and L wires to make them easier to find during testing. The CAN H and L wires should be connected to an electrical source that delivers a constant 12V. It is important to check the connections again after testing, as an incorrect identification of these wires may cause the system malfunction.
The system must be activated
A ghost immobiliser blocks your car from starting unless you press a series of buttons within the car, usually the steering wheel, door panel, or central console. The sequence is determined by the user and is able to be changed at any time. Once the system is activated, it is in no way able to be removed by thieves which makes it a great choice for anyone who wants to safeguard their vehicle from theft.
The device is not designed to be able to be detected by modern diagnostics and code-grabbing technologies. It doesn’t emit radio frequency either which makes it harder for thieves to detect.
If the device is identified, it will stop the engine from running and sound an alarm that is loud enough to scare away the thief. The device can be used to monitor the location of the vehicle and assist police locate it when it is stolen.
If you’re interested in a ghost-immobiliser, contact the experts at Car Specalist Customs to get a quote and discuss your options. We are fully qualified to install a ghost immobiliser for your vehicle and will ensure that it is tucked away in a difficult-to-access area. We also offer other security measures such as the wheel lock and kill switch to help keep your car safe from thieves.
Disarming the system
It’s important to understand how to disable a Ghost immobiliser if it is installed in your vehicle. This will help you in the event that you lock your keys inside the car or if your battery dies. The system utilizes a unique PIN code that only you are aware of. It won’t be able to start the vehicle without this code. Pressing ghost immobiliser problems on the dashboard or steering wheel is the easiest method of entering your code. This is a lot easier than using a key fob, and prevents others from copying the remote.
Ghost2 isn’t intrusive, unlike some aftermarket immobilisers which require cutting wires for installation. It also integrates with the CAN bus system of your vehicle to function. Its most distinctive feature is that it shuts off the engine, without affecting normal vehicle functions. This makes it extremely difficult for thieves to use signal boosters or to clone keys for cars. Furthermore, it doesn’t emit radio frequencies, so thieves can’t detect the system.
The Ghost system has an option called Transport Mode which allows you to temporarily disable security for situations such as service or transportation. This feature is an excellent option if you need to lend your vehicle to someone without sharing the PIN code or when you wish to keep your vehicle secure while driving it. To activate the Transport Mode you need to press the service button five times within 2 seconds. The Ghost system will confirm activation by giving 5 indication signals.
Keep the emergency code inside your vehicle in a secure location. Then, if you ever encounter a situation where you are locked out of your vehicle, call the technician or company who installed the system, and they will provide you with the code. If you’re unable to contact them, you can contact an authorized dealer. However, this may involve verification procedures, and you could be charged additional charges.
In addition to the convenience of this system, you can count on it to guard your car against theft and cut down on insurance costs. Many insurance companies offer reduced monthly rates or even financial incentives to install this anti-theft system.