Ghost Immobiliser Fitting
Protect your vehicle against key theft, cloning and hacking using the first aftermarket CAN-Immobiliser. With the added option of connecting to a Ghost app and GPS tracking system that can send you call alerts in the event that your vehicle is damaged with or stolen.
Installing a Ghost immobiliser is relatively straightforward for a skilled technician. It is essential to have the proper equipment and heat shrink tubing.
Getting Started
In contrast to physical security devices like wheel locks and car alarms, ghost immobilisers safeguard your vehicle without the use of key fobs or LED indicators. They connect directly to the ECU CAN data network and can only be activated by entering a PIN code. This offers a higher level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high level of agility and precision. It’s like navigating the minefield. A single mistake could cause severe damage to the circuits of your vehicle’s electrical system. To avoid this, it’s crucial to be aware of the installation process and prepare your vehicle appropriately.
It is necessary to remove interior panels from the vehicle to make space for your immobiliser. Once you have found the perfect place to hide it and you have it, use cable tie to ensure it is secured. Then, tidy up your wiring by making sure that loose wires are tied down and using insulation tape to cover exposed connections. This will reduce the risk of a short circuit that is not intended to happen while also improving the appearance and reducing the risk of theft.
Finally, identify the source of constant 12V power as well as a grounding location for the ghost immobiliser. Once you’ve identified these and tested the power wires using a multimeter to ensure they’re delivering the same voltage. Finally, connect the CAN H and CAN L wires from the immobiliser to the designated power source and the grounding point.
After you’ve made all the necessary connections It’s crucial to double-check them and inspect the immobiliser for signs of corrosion or other damage. Entering a PIN and starting the car is a good method to test the system. This should be part of your routine, as it will allow you to spot any issues that are intermittent early. Regular testing can help to improve the longevity of the device, and keep it running at its peak performance.
Preparing the vehicle
The installation of an Ghost immobiliser can be a difficult task that requires the right tools and understanding. A wiring diagram is essential for finding the correct wires, making accurate connections, and ensuring safety. A multimeter can be used to check the electrical properties and ensure security. Insulation tape and cable ties can be used to protect the connections from damage and to ensure they are secured. A user’s manual will give you specific instructions specific to the Ghost Immobiliser model you have.
Once installed ghost ii immobiliser can stop unauthorised engine start-ups by requiring the driver to enter a unique code sequence using the buttons on the steering wheel or console. This can be accomplished manually or remotely using an app for mobile phones, and the code can be modified by the vehicle’s owner at anytime. The device is also silent and undetectable by thieves, because it doesn’t emit any radio frequencies.
A ghost immobiliser is connected directly to the vehicle’s CAN bus, which is a network that communicates with all the electronic control units (ECUs). It intercepts the signals transmitted by ECUs and shuts down the engine when a false signal is identified. The system is weatherproof and tamperproof. It has no keys or LED indicators to attract thieves’ attention.
It can be placed behind or in a more obscure area so that it’s not easily spotted by thieves and won’t hinder vehicle performance. It could even be placed in a small container, making it less likely to be spotted during an inspection by unscrupulous salespeople selling cars.
Its stealthy operation, combined with its integration into the vehicle’s CAN-bus system is an effective deterrent to vehicle theft techniques such as signal relay attacks and key copying. The system can be integrated with other security measures to create an effective barrier that can deter even the most ardent thieves. This is why more insurance companies are now recommending or even requiring ghost immobilisers to be installed, as it can significantly reduce monthly premiums.
Making Connections
Unlike traditional security systems that are heard by thieves ghost immobilisers operate in a quiet manner to prevent them from knowing when your vehicle has been turned on. They also block high-tech methods of theft, such as OBD hacking. Installing them without leaving permanent marks on your car is a great option for those who plan to sell their vehicle in the near-future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable methods to prevent car theft. It makes use of the CAN data network to disable your engine and generates a PIN code that only you know, which means it’s difficult for criminals to recognize. It can be used on various vehicles, and it works with all the features that are already in place, such as car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you choose to use a Ghost immobiliser for your vehicle, be sure to consult the wiring diagram to identify the wires that connect. Double-check the locations of these wires to ensure their accuracy, and mark them with labels or tape to make it easier to keep on track of them. You’ll also need to locate a constant power source (12V) for the system and a grounding. Once these are in place, you can begin making the connections to complete the installation.
If the ghost immobiliser has been connected to the CAN bus, it will block your vehicle from starting unless you enter a pin code through the buttons on the dashboard or steering wheel. This will stop ECU cloning and other methods of theft of vehicles. It can also be used with other Thatcham approved security accessories like alarms or tyre clips to provide your vehicle with an even greater security level.
As the UK automotive industry continues to expand, and so do the options to secure your car. With so many ways for thieves to get in and take your car it’s crucial to do everything you can to prevent it from being stolen. Ghost immobilisers are a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle’s ECU via an CAN network. This stops the engine from being started until the PIN code is entered. This makes it very difficult for thieves to copy the key fob of your car and start your car, and even more difficult to disable the system through hacking into its electronics.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to assist you to locate your vehicle if it is stolen. This feature is not commonly found in aftermarket security products, but it is a great option to increase the security of your vehicle and provide you with peace of mind.
The Ghost-II immobiliser not only provides an enhanced security, but also a convenient experience for the user by eliminating the need to use additional key fobs or devices. It comes with an easy and simple PIN code entry system that seamlessly into your daily routine. It also comes with convenience features and deactivation options that allow you temporarily disable the immobiliser in order to park or service your vehicle.
Before beginning the installation process, be familiar with your vehicle’s wiring and prepare the required tools. A basic set of tools can enable you to create precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat-shrink tubing are essential to safeguard connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in a space that is well-lit, and wear safety gear when using electrical tools and components.
After you’ve completed the installation you should test the Ghost immobiliser to ensure that it’s working as intended. Try to start the vehicle without entering the PIN. If this fails, you’ll need to test the system again and perform a more thorough examination of the connections.
The Ghost Immobiliser, unlike other security systems is a covert device which cannot be recognized by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA-approved and endorsed by some insurance companies. This makes it a cost effective investment that gives you the peace of mind you deserve.